|
| |
|
|
Preparation of Tobermorite
Dlabajová, Lucie ; Palou, Martin (referee) ; Martinec, Petr (referee) ; Ptáček, Petr (advisor)
This doctoral thesis is focused on the study of reactions in the CaO–SiO2–H2O complex system, primarily to the synthesis of crystalline tobermorite. Hydrothermal conditions are necessary for the formation of crystalline tobermorite, whereas the course of the reaction is influenced by several factors. The main studied factor was the choice of the silica sources differing in means of solubility, crystallinity, particle size distribution, specific surface area, and purity. The water-to-solid ratio turned to be also an important factor as the length of the hydrothermal reaction. The influence of the mechanochemical pretreatment of starting materials to the final phase composition of samples was studied as well. The obtained results show that the crystallinity of the silica source is the main factor influencing the reaction rate and the purity of the synthesized tobermorite. While using the crystalline silica source the shorter silicate chains are formed and the formation of tobermorite structure is easier. Using the amorphous silica sources and the mechanochemical pretreatement of starting materials prolong the hydrothermal reaction. The prepared samples are always the mixture of crystalline or semicrystalline calcium hydrosilicates instead of the phase pure tobermorite.
|
|
| |
|
|
Development of methodology for study of mechanical activation of chemical reactions at phase boundaries
Matoušek, David ; Kalina, Lukáš (referee) ; Šoukal, František (advisor)
This Bachelor thesis deals with impact of mechanochemical activation on a nature of interphase region in macro-defect-free composites (MDF). MDF composites are highly perspective material on a polymer-cement basis. The most significant advantage of this material is high flexural strength (cca 150 MPa). High strength is caused by high-shear mixing of mixture of cement, polymer, water and plasticiser in twin-roll mill. High-shear stress leads to mechanical activation of reactions between cement and polymer and creation of weak or even strong interactions in interphase region. This work aimed on creation of interphase region by contact of surfaces of two moulded tablets – polyvinyl alcohol and monocalcium aluminate. Next step was construction of simple apparatus, able to define the rate of mechanical activation in interphase region. The most important part of this work concentrated on analysis of activated interphase region by XPS.
|
|
|
Mechanical activation of chemical reactions at interfaces of MDF composites
Matoušek, David ; Másilko, Jiří (referee) ; Šoukal, František (advisor)
The thesis deals with study of mechnochemical activation of chemical reactions at interphase of MDF composites. MDF composites are high-perspective composite materials on polymer-cement base. They excel especially in terms of flexural strengths. High flexural stregth is caused by binding interactions between the polymer and the cement. This interactions arise due to mechanochemical activation of raw material mixture at the stage of production. This work focuses on the creation of artificial cement-polymer interphase by contacting the surfaces of two molded tablets (polyvinyl alcohol and monocalcium aluminate), activation of chemical reactions at interphase by means of specially designed appartus, which achieves good plane-parallelism of activation surfaces and good definability of activation conditions (shear rate, pressure). After experiments under different conditions, the activated surfaces are analyzed by SEM, EDS, XPS and FT-IR.
|
|
|
Preparation of Tobermorite
Dlabajová, Lucie ; Palou, Martin (referee) ; Martinec, Petr (referee) ; Ptáček, Petr (advisor)
This doctoral thesis is focused on the study of reactions in the CaO–SiO2–H2O complex system, primarily to the synthesis of crystalline tobermorite. Hydrothermal conditions are necessary for the formation of crystalline tobermorite, whereas the course of the reaction is influenced by several factors. The main studied factor was the choice of the silica sources differing in means of solubility, crystallinity, particle size distribution, specific surface area, and purity. The water-to-solid ratio turned to be also an important factor as the length of the hydrothermal reaction. The influence of the mechanochemical pretreatment of starting materials to the final phase composition of samples was studied as well. The obtained results show that the crystallinity of the silica source is the main factor influencing the reaction rate and the purity of the synthesized tobermorite. While using the crystalline silica source the shorter silicate chains are formed and the formation of tobermorite structure is easier. Using the amorphous silica sources and the mechanochemical pretreatement of starting materials prolong the hydrothermal reaction. The prepared samples are always the mixture of crystalline or semicrystalline calcium hydrosilicates instead of the phase pure tobermorite.
|
|
|
Mechanical activation of chemical reactions at interfaces of MDF composites
Matoušek, David ; Másilko, Jiří (referee) ; Šoukal, František (advisor)
The thesis deals with study of mechnochemical activation of chemical reactions at interphase of MDF composites. MDF composites are high-perspective composite materials on polymer-cement base. They excel especially in terms of flexural strengths. High flexural stregth is caused by binding interactions between the polymer and the cement. This interactions arise due to mechanochemical activation of raw material mixture at the stage of production. This work focuses on the creation of artificial cement-polymer interphase by contacting the surfaces of two molded tablets (polyvinyl alcohol and monocalcium aluminate), activation of chemical reactions at interphase by means of specially designed appartus, which achieves good plane-parallelism of activation surfaces and good definability of activation conditions (shear rate, pressure). After experiments under different conditions, the activated surfaces are analyzed by SEM, EDS, XPS and FT-IR.
|
|
|
Development of methodology for study of mechanical activation of chemical reactions at phase boundaries
Matoušek, David ; Kalina, Lukáš (referee) ; Šoukal, František (advisor)
This Bachelor thesis deals with impact of mechanochemical activation on a nature of interphase region in macro-defect-free composites (MDF). MDF composites are highly perspective material on a polymer-cement basis. The most significant advantage of this material is high flexural strength (cca 150 MPa). High strength is caused by high-shear mixing of mixture of cement, polymer, water and plasticiser in twin-roll mill. High-shear stress leads to mechanical activation of reactions between cement and polymer and creation of weak or even strong interactions in interphase region. This work aimed on creation of interphase region by contact of surfaces of two moulded tablets – polyvinyl alcohol and monocalcium aluminate. Next step was construction of simple apparatus, able to define the rate of mechanical activation in interphase region. The most important part of this work concentrated on analysis of activated interphase region by XPS.
|
|
| |
|
| |
guest ::
